beautypg.com

Group 8: demo – KORG BX-3 User Manual

Page 36

background image

Parameters

36

Default DB Select (Default Drawbar Select)

[PRESET, 1, 2]

This controls which settings in the DRAWBAR SELECT
section will be active when the power is turned on.

1 . Ent

er

Gl

obal

mode,

and

sel

ect

t

hi

s

paramet

er.

2 . Press the [WRITE/ENTER] key.

The display will allow you to specify your choice for
the upper DRAWBAR SELECT section.

3 . Use

the

[-]

[+]

keys

to

sel

ect

the

power-on

sett

ing

for

the upper DRAWBAR SELECT section.

PRESET: When the power is turned on, the [Preset
Drawbar] key will be recalled.
1: When the power is turned on, the [Drawbar 1] key
will be recalled.
2: When the power is turned on, the [Drawbar 2] key
will be recalled.

4 . To

speci

fy

the

power-on

sett

ing

for

the

lower

DRAW-

BAR SELECT section, press the [

®

] key.

5 . Use

the

[-]

[+]

keys

to

sel

ect

the

power-on

sett

ing

for

the lower DRAWBAR SELECT section.

6 . Press the [WRITE/ENTER] key.

When the settings have been registered, the display
will indicate DfltDB Set Completed, and will then
indicate Default DB Select.

Exp Pdl Calibration (Expression Pedal Calibration)

If operating the expression pedal connected to the rear
panel EXPRESSION PEDAL jack does not produce the
appropriate result, use the following procedure to adjust
the sensitivity of the expression pedal.

1 . Connect

the

expr

essi

on

pedal

to

the

rear

panel

EXPRESSION PEDAL jack.

2 . Sel

ect

thi

s

par

amet

er

.

3 . Press the [WRITE/ENTER] key.

The display will indicate Set ExpPdl Min Pos.

4 . Move

the

expr

essi

on

pedal

to

the

mi

ni

mum

posi

ti

on,

and press the [WRITE/ENTER] key.

The display will indicate Set ExpPdl Max Pos.

5 . Move

the

expr

essi

on

pedal

to

the

maxi

mum

posi

ti

on,

and press the [WRITE/ENTER] key.

Wheel Brake ON

This simulates the way in which the tone wheel rotation
slows down when the power of a tone wheel organ is
switched on/off.
When you press the [WRITE/ENTER] key, the tone wheel
rotation will gradually slow down and stop. At this time,
the pitch will also fall. Press the [WRITE/ENTER] key
once again, and tone wheel rotation will gradually
resume.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Group 8: DEMO

DEMO Play

[1...9]

Here you can select and play back the demo songs.
For details, refer to “1. Listening to the demo songs”
(p.11).