Kenwood K-501USB - Manual (Page 8)

8
English
Connections
1
2
3
Connec t ever y connec tion cord firmly.
Incomplete insertion may cause loss of audio
output or generation of noise.
FM indoor antenna
The provided FM antenna is a
simplified one for indoor use,
intended for temporary use. To
receive FM stations stably, it is
recommended to use an outdoor
antenna (commercially available).
Remove the simplified antenna after
connecting the outdoor antenna.
Malfunction of microcomputer
If the system does not work properly or the display
shows wrong information even when correct
connections are made, refer to page 71 of the
“Operating Procedures” to take proper measure.
Connect the antenna to the antenna terminal.
Find the antenna location that offers best
reception.
Fix the antenna in the found location.
Caution for speaker cord connection
If the speaker cord is connected by inverting the + and
– polarity, the reproduced audio will be unnatural with
unclear positioning of musical instruments.
Be careful not to short-circuit the + and – conductors of
the speaker cord.
Caution for connection
Do not plug the power cord into the power
outlet until all other connections are completed.
Before unplugging a connected cord or cable, be
sure to set the power key to OFF and unplug the
power cord from the power outlet in advance.
Connecting the main unit and accessories
LS-K501 R
Twist and remove the vinyl
coating on the extremity
of each speaker cord. Also,
apply the same treatment to
the antenna cord extremities.
(Right speaker)
Treatment of the speaker cord extremities
Connecting a speaker cord to the main unit
White line on transparent coating
Connecting a speaker
cord to the speaker