Kenwood K-501USB - Manual (Page 13)

13
1
2
3
4
5
16
5
6
7
8
9
10
11
12
13
14
15
Standby mode
When the standby/timer indicator is lit, a small amount of
power is supplied to the system to back up the memory. This
status is referred to as the standby mode. During this mode,
the system can be switched OFF from the remote control unit.
One-touch operation function
Main unit
Power key (See page 25.)
Press to switch the power of the system ON/OFF
(standby mode).
Standby/timer indicator
The indicator lights when the system power is
set to the standby mode.
Red lighting: Ordinary standby mode
Amber lighting: Timer standby mode
CD tray (See page 25.)
Place a CD on the tray.
CD open/close key (See page 25.)
Press to open or close the CD tray.
SET UP/DEMO key
Press to set up the system of this unit.
(Refer to page 42 of the “Operating Procedures”.)
Press or hold to switch demonstration on/off. (See page 12.)
Play/pause keys (Refer to pages 6~ of the “Operating Procedures”.)
Press to start or let pause the playback of each audio input source.
STOP [AUTO/MONO] key
Press to stop playback or recording. (Refer to page 6~ the
“Operating Procedures”.)
Press during a setup to stop it in the middle.
When the tuner source is selected, press to select the auto or
manual tuning. (Refer to page 21 of the “Operating Procedures”.)
Press in the standby mode to display the current time for 5
seconds. (Refer to page 69 of the “Operating Procedures”.)
CD USB O.T.E. key
(Refer to page 26 of the “Operating Procedures”.)
Press to start O.T.E. recording of a CD.
CD MEMORY O.T.E. key
(Refer to page 28 of the “Operating Procedures”.)
Press to start O.T.E. recording of a CD.
Headphones jack (See page 10.)
Connect headphones (separately available) equipped
with a stereo mini-plug.
VOLUME control knob (See page 28.)
Press to adjust the listening volume. Turning the
knob clockwise increase the volume and turning it
counterclockwise decreases the volume.
Remote control sensor (See page 15.)
INPUT SELECTOR key
(Refer to pages 9 to 11 of the “Operating Procedures”.)
Press to select the source for D.AUDIO or AUX.
USB connector (See page 10.)
Connect a USB audio player.
MULTI CONTROL knob
Press to select music, music file or broadcasting station.
Use during playback to fast forward or fast reverse it.
Use during setting to select and enter an item.
TUNER/BAND key (Refer to page 20 of the “Operating Procedures”.)
Press to select the tuner source.
Also, press to select the radio-broadcasting band
D.AUDIO IN connector (Refer to page 10 of the
“Operating Procedures”.)
Connect a Kenwood digital audio player using
the dedicated cable.
The system incorporates the convenient one-touch
operation function. When the system is in standby mode,
pressing one of the keys switches the system ON. If
a disc is loaded in the selected audio input source, its
playback also starts at the same time.
SETUP/DEMO
MULTI CONTOROL
VOLUME
PHONE
MEMORY
CD
USB
INPUT SELECTOR
TUNER/BAND
CD MEMORY O.T.E. CD USB O.T.E.
STOP [AUTO/MONO]
IN
3 5
7
6
8
9
10 11 12 13 14 15
4
16
1 2