Kenwood K-501USB - Manual (Page 7)

7
Installation
Installation Method
Place the left and right speakers correctly. If
they are placed in wrong locations, the left and
right audio cannot be reproduced correctly.
Place the main unit by leaving a space of at
least 1 cm from each speaker.
Always install the system on a level, stable
surface. If the system is installed on a bench
or desktop, be sure to check its strength
before installation.
CAUTION
Observe the following cautions when
installing the system. Insufficient heat
radiation may build up internal heat and
cause a malfunction or fire hazard.
Install the system so that the power outlet is
easily accessible from the user, and unplug
the power cord from the power outlet
immediately in case of a trouble.
Note that the power supply to the system is
not shut down completely by simply setting
the power key to OFF.
To shut down the power supply completely,
it is required to unplug the power cord.
The magnetism from the speakers may
cause color irregularities on a nearby TV or
PC screen. Always install the speakers at a
distance from a TV or PC.
The audio is variable depending on how the speakers are installed. Ensure the following points to enjoy music with
higher quality.
Make the environments around the left and right speakers as equal as possible. Also reduce the sound reflections in
these environments as low as possible.
(For example, install the left and right speakers at distances from the walls and hang a thick curtain on glass windows.)
Place the left and right speakers at a large distance between each other.
Place the left and right speakers on the same height as the ears of the listener.
Do not place an object that may hinder
heat radiation on the system.
Leave the spaces specified below
around the cabinets of the main unit.
Install this system as shown below.
To improve the audio effects
Top panel: 50 cm or more
Back panel: 10 cm or more
Left speaker Right speaker
Main unit