The cd contents are edited as follows, To check the edited contents, Playing or recording the edited contents – Kenwood D-S300 User Manual
Page 21: To clear the edited contents
2 1
D-S300 (En)
The CD contents are edited as follows.
(1) The tape recording time input is divided by two, and tracks that can
be accommodated in file
A (which refers to tracks on tape side A) are
selected in order of their track Nos.
(2) In a few seconds, the time left on tape side
A is displayed, then file
B (tracks on tape side B) is edited in the same manner.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
the last track on side A or side B may be cut short.
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
Editing in the FILE A
D
E
T
I
A
0 1
The selected track numbers are displayed in sequence.
D
E
T
I
A
1
-
2
:
3
Remaining time display.
Notes
Notes
To clear the edited contents
To check the edited contents
D
E
T
I
A
0 1
0
Remote control unit only
÷
When the
CHECK key is pressed, track numbers and remaining time
in the file A are displayed first, then those in the file B.
P.MODE
P.mode
ENTER
Clear
ENTER
Press any one of these keys.
÷
The edited data is cleared entirely.
Playing or recording the edited contents
Press the
6 key to start playback according to the edited
content. The playback pauses at the beginning of the track
edited for tape side B. Press the
6 key again to continue
playback.
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
÷
For details, see the instruction manual of the cassette deck.
Note
Note
GRC operation
RC operation
GRC operation
RC operation
GRC operation
RC operation
6
Return
ENTER
ENTER
CHECK
Check
ENTER
Main unit operation
CLEAR
Editing