Kenwood D-S300 - Manual (Page 18)

D-S300 (En)
1 8
Repeated playback
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
Preparation ÷
Load a disc in the CD player.
÷ Set the INPUT SELECTOR to ”CD“ on the
connected device such as AV CONTROL
CENTER or receiver.
MULTIPLE CD PLAYER D-S300
2
Select the desired track No.
Go to step
2
within 8 seconds.
1 2 3
4 5 6
7 8 9
0 +10
ENTER
+10
5 4 3 2 1
0 9 8 7 6
3
Set the entry.
Go to step
3
within 8 seconds.
P.mode
ENTER
P.MODE
4
Repeat steps 2 – 3 above.
5 Switch REPEAT ON.
Repeat
Return
ENTER
ENTER
÷
All of the programmed tracks will be repeated.
÷
In case only one track is programmed, only that track will be repeated.
÷
Up to 32 tracks can be programmed. When “ FULL ” is displayed, no
more tracks can be programmed.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
→
OFF)
(
1
Press so that the “PGM” indicator lights.
P.MODE
PGM
Mode
P.mode
ENTER
ENTER
ENTER
GRC operation RC operation
E R E P T A O N
6
Start playback.
PGM
ENTER
ENTER
6
The current status is displayed when the key is pressed
once. When it is pressed while the status is displayed, the
repeat ON status can be set to OFF (or vice versa).
GRC operation
To display the current status, first select the Return icon and press
the ENTER key, and then select the Repeat icon and press the
ENTER key.
Pressing the
ENTER key again while the status is displayed will set
the repeat ON status to OFF (or vice versa).
G P 0 M 1 N T . O ? ?
GRC operation : Complete the procedure in “Basic Operations
for the Graphical Remote Control Unit (GRC)”
90
REPEAT
Main unit operation