Kenwood D-S300 - Manual (Page 12)

D-S300 (En)
1 2
Normal play (TRACK mode)
1
2
Load a disc.
3
Start playback.
1
Open the tray.
Use the following procedure to play a CD in the original order
of tracks from track No. 1.
: Keys and control used in the operations described on this page.
3
Close the tray.
÷
Do not touch the played side of disc.
÷
Loading two discs together will cause malfunctioning.
÷
Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷
A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
÷ In the case of a CD-TEXT disc, the disc’s title is scrolled on the display.
÷ Each press pauses and plays the CD alternately.
Playing tracks in order from track No. 1
To stop playback To pause playback
2
Place a disc.
Lights up.
Lights up.
Track NO. being played Elapsed time of track being played
Turn the unit ON.
÷ In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
What is then displayed is in accordance with the
TEXT DISPLAY mode.
%
Preparation
MULTIPLE CD PLAYER D-S300
MULTIPLE CD PLAYER D-S300
MULTIPLE CD PLAYER D-S300
MULTIPLE CD PLAYER D-S300
1 0
0
MULTIPLE CD PLAYER D-S300
0
7 6
6
MULTIPLE CD PLAYER D-S300
Disc tray
MULTIPLE CD PLAYER D-S300
Label side
C O L E S •
1 0 : 1 3 2
MULTIPLE CD PLAYER D-S300
GRC operation : Complete the procedure in “Basic Operations
for the Graphical Remote Control Unit (GRC)”
90
ON/STANDBY