Kenwood R-K711 - Manual (Page 56)

56 R-K711
Registering Sound Eff ects
Use this procedure to register up to 3 of the sound eff ects set using AUTO
ROOM EQ, ROOM EQ MODE, D-BASS or TONE/TURN OVER.
First use AUTO ROOM EQ (P.48), ROOM EQ MODE (P.51), D-BASS (P.52) or TONE/TURN
OVER (P.53) to set a sound eff ect. z
Select a Sound Preset number (1–3).
Press the [ G] or [H] key.
3 3
The selected preset number fl ashes. z
2 2 Select “SOUND PRESET”.
Press the [ G] or [H] key.
You can register up to 3 of the sound eff ects you have set as Sound Presets.
You can then recall and apply the registered Sound Presets simply by pressing the [SOUND PRESET] key.
Press the [ENTER] key.
“ 1”, “2” or “3” fl ashes. z
1 1 Press the [MODE] key.
Press the [ENTER] key.
The registered Sound Preset number lights and the sound eff ect currently
set is registered. z
Sound Presets