Kenwood R-K711 - Manual (Page 43)

43
External Components
Related
Information
English
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [PHONO IN], [TAPE PLAY IN] or [AUX IN]
terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Press the [INPUT SELECTOR] key to adjust the input
level.
You can set the input level for each of PHONO, TAPE and AUX.
1 1
Select “INPUT LEVEL”.
Press the [ G] or [H] key.
3 3
Set the input level.
Press the [ G] or [H] key.
4 4
You can adjust the input level in a
range from –3 to +5. z
Press the [ENTER] key.
Connecting Other Accessories (Commercially Available Units) R P.12
Audio Settings R P.47 onwards
z
z
If you adjust the input level for PHONO or AUX, the output level from the
[TAPE REC OUT] terminal will also change. z
Press the [MODE] key. 2 2
Press the [ENTER] key.