Kodak DP1100 - Manual (Page 21)

Turning Off the Projector
3/99 17
ENGLI
S
H
Turning Off the Projector
To turn off the projector for a short period of time, press the
button on the keypad or remote control. This blanks the screen for
a preset amount of time but keeps the projector running. After the
set amount of time elapses again, the lamp turns off. To exit
standby mode, press the button again.
To completely turn off the projector, press the “0” side of the
power switch on the side of the projector. If you want to turn the
projector back on immediately, allow about a minute for the lamp
to cool. The lamp will not light if it is too hot.
Always unplug the projector from the wall outlet before
unplugging the cord at the projector.