Canceling a print job, Canceling a print job -5 – Konica Minolta Image Controller IC-205 User Manual
Page 76

Control panel operations
6
IC-205
6-5
C
ontr
o
l pa
nel
op
er
ati
ons
Ch
apt
er
6
Canceling a print job
You can cancel a print job from the control panel of the machine only while
the machine is in the PC print mode.
1
Check that the [Printer] indicator is
flashing or is lit, and then press the
[Printer] key.
2
Make sure the machine’s display
shows
*PC PRINT* PRINTING
.
–
The message that appears differs
depending on the status of the
machine.
3
Press the [Stop] key.
The
PC JOB CANCEL?
confirmation
message appears.
4
Press the [Yes] key to cancel the
print job.
–
Press the [No/C] key to resume
printing.
–
If no key is pressed within 5 sec-
onds, printing will resume.
JOB CANCELED
appears on the
display and the print job is canceled.
This manual is related to the following products: