Konica Minolta Image Controller IC-205 - Manual (Page 26)

Connecting to a computer 3
IC-205 3-3
Conn
ec
ting
to
a c
o
mp
uter
Chap
ter
3
3.2 Parallel port connection
Use the parallel cable to connect the parallel port of the machine to the par-
allel port of the computer.
2
Reminder
Be sure to use a shielded parallel cable. Use of an unshielded cable may
result in radio frequency interference.
The parallel port is compatible with IEEE1284 Type B standards.
Connecting the machine to the parallel port of the computer
1
Turn off both the machine and your computer.
2
Connect one end of the parallel cable to the parallel port (printer port)
of the computer.
3
Connect the other end of the cable to the parallel port on the left side
of the machine. Secure the interface cable connectors using the two
clips.
This completes connection of the machine to the computer.