Kenwood KRF-X9080D - Manual (Page 22)

22 EN
ENGLISH
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will light up to indicate the source signal. Adjust the input level.
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96k A B CLIP
AUTO D
LFE
CLIP CLIP
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
• You can store a separate input level for each input source.
2 Press the SOUND and ∧ ∧ ∧ ∧ ∧/∨ ∨ ∨ ∨ ∨ keys or @/# keys repeatedly until
the “INPUT” indication appears.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
input level.
L
SL S SB SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
PRO LOGIC
• The adjustment mode is displayed for approximately 20 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
4 Press the SOUND key again to return to the input indication.
Preparing for surround sound
04.6.16, 3:54 PM 22