Pre out connections, Setting up the system – Kenwood KRF-X9080D User Manual
Page 16
16
EN
ENGLISH
ROOM B
FRONT
SURROUND SURROUND
BACK
SUB
WOOFER
CENTER
PRE OUT
R
L
Setting up the system
PRE OUT connections
This receiver has additional PRE OUT jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as
shown in the example below.
• Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
• To use the PRE OUT jacks, press only the SPEAKERS A key to the ON position.
• This model is designed on the assumption that a pair of Surround Back Speakers is connected.
When use only one Surround Back Speaker, connect it with either speaker terminal of “SURROUND BACK L” or “SURROUND BACK R” and
increase the volume level of the test tone by 3 dB for the channel which has been connected.
)
In this case, when “Dolby PRO LOGIC
IIx” is selected at LISTEN MODE, sound is output at the connected channel only.
Power Amplifier
Center Speaker
Powered
Subwoofer
Surround Back
Speakers
Surround Speakers
Front Speakers
L
R
L
R
L
R
Power Amplifier
Power Amplifier
Power Amplifier
04.6.16, 3:51 PM
16