Kodak 4000 - Manual (Page 59)

49
Chapter 6
Transfer Light
Light Status Cause Action/Solution
Light glows steady
green The printer dock is ready for
transferring pictures. None required.
Light blinks green Pictures are being
transferred to the computer.
Light is off There are no pictures in the
camera. Take a picture.
The camera is not on the
printer dock or is improperly
seated. Place the camera on the
printer dock (
page 14 )
or readjust the camera
placement.
The printer dock is not
connected to the computer. Connect the printer
dock
to the computer
( page 21 ).
The camera is in auto power-
off. Press any button on the
printer dock.
The printer dock is printing
from the camera. The Transfer button is
disabled.
The computer is not on. Turn on the computer.
urg_00170.book Page 49 Thursday, August 14, 2003 7:20 AM