Kodak 4000 - Manual (Page 48)

38
Chapter 6
Paper stops
traveling before
print is
completed. The removable tabs
may be missing,
causing the paper to
misfeed. Remove the paper tray and make
sure removable tabs are attached.
Reload with new paper if necessary
(
page 8 ).
Print is scratched
along the length
of the print. The print head may
need cleaning. Clean the print head ( page 32 ).
The paper may be
dusty or dirty. Remove dirty paper.
Print is blank or
light. The paper is loaded
upside down. Reload the paper with the glossy
side facing up and Kodak logo
facing down.(
page 8 ).
The wrong paper is
loaded. Use only Kodak color cartridge &
photo paper kit.
Print is smudged. There were
fingerprints on the
print side prior to
printing.
Handle paper by the edges or by the
removable tabs.
Print is spotted. The paper may be
dusty or dirty. Remove dirty paper.
Keep the printer in a clean
environment (
page 3 ).
Printing
Problem Cause Action/Solution
urg_00170.book Page 38 Thursday, August 14, 2003 7:20 AM