Mmc 30 station toll class – Samsung NX-308 User Manual
Page 99
This MMC is used to assign any of the 6 different day and/or night class of service to each
station, as per the table below:
DIAL DIGIT TOLL CLASS
DESCRIPTIONS
1
A
No restriction
2
B
Follow allow/deny table for each class
3
C
Follow allow/deny table for each class
4
D
Follow allow/deny table for each class
5
E
Follow allow/deny table for each class
6
F
Intercom call only
PROCEDURE
LCD DISPLAY
1. Press [TRANSFER] and dial 30
2. Using [VOLUME (-) or (+)], select a station (e.g. 202)
To select all stations, press [VOLUME (-)] first
3. Dial 1~6 (e.g. 2 3) (two digits, the first for Day and the
second for Night class), to select A~F class as per table
above. Display shows A~F class
4. Press [TRANSFER] to save and exit
DEFAULT DATA
DAY CLASS
: A
NIGHT CLASS : A
RELATED MMC
MMC 60 TOLL DENY TABLE/APPLY
MMC 61 TOLL ALLOW TABLE/APPLY
NX-SERIES
HYBRID KEY SYSTEM
PROGRAMMING SECTION
MMC 30
STATION TOLL CLASS