Samsung NX-308 User Manual
Page 122
This MMC is used to allow the ability to change the duration of the make/break time of
pulse (rotary) dial trunks.
PROCEDURE
LCD DISPLAY
1. Press [TRANSFER] and dial 54
2. Enter the MAKE/BREAK ratio on the KEYPAD
(e.g. MAKE:40 BREAK:60)
3. Press [TRANSFER] to save and exit
DEFAULT DATA
MAKE : 33
BREAK : 66
RELATED MMC
MMC 41 TRUNK DIALING TYPE
This MMC is used to set the system date and time on the system-wide clock.
YY
Year
00~99 (e.g. 1995 = 95)
MM
Month
01~12
DD
Date
01~31
W
Day
0~6 (0:SUN 1:MON 2:TUE 3:WED
4:THU 5:FRI 6:SAT)
HH
Hour
00~23
MM
Minute
00~59
PROCEDURE
LCD DISPLAY
1. Press [TRANSFER] and dial 55
Display shows
2. Enter current date and time using above table
display = 1995. 7. 5. Wednesday, 11:35
3. Press [TRANSFER] to save and exit
DEFAULT DATA
SAT 01 JAN 12:00
RELATED MMC
MMC 15 DATE DISPLAY
NX-SERIES
HYBRID KEY SYSTEM
PROGRAMMING SECTION
MMC 54
MAKE/BREAK RATIO
MMC 55
CURRENT DATA AND TIME