Kenwood KDC-M9021 EN - Manual (Page 41)

— 41 —
TEL MUTE
EXT.CONT
P.CONT
ANT.CONT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
FRONT
NON FADING
REAR
Front left output (White) 14
Front right output (Red) 13
Non-fading right output (Red)
(KDC-PSW9521/ M9021SE/ M9021 only)
Rear right output (Red) 11
Rear left output (White) 12
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
Battery wire (Yellow) 6
Ignition wire (Red) 7
FM/AM
antenna input
2
Antenna Cord (ISO) 3
Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 1
Wiring harness
(Accessory1)
5
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
24
Power control/ Motor antenna
control wire (Blue/White)
22 Connect either to the power control
terminal when using the optional
power amplifier, or to the antenna
control terminal in the vehicle.
26
A–7 Pin (Red) 8
A–4 Pin (Yellow) 9
Connector B
Fuse(10A)
4
Connector A
TEL mute wire (Brown) 21
To connect the KENWOOD
navigation system, consult your
navigation manual.
25
External amplifier control wire
(Pink / Black)
0 To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
23
Non-fading left output (White)
(KDC-PSW9521/ M9021SE/ M9021 only)
29
To KENWOOD disc changer/
DAB control input/
KPA-SD100/KPA-HD100/KPA-SS100
16
To connect these leads, refer
to the relevant instruction
manuals.
17
Connecting Wires to Terminals
If no connections are
made, do not let the
cable come out from
the tab.
27
To External Display/
Steering remote
KDC-M9021SE_U.S 03.1.17 3:20 PM Page 41