Kenwood KDC-M9021 EN - Manual (Page 28)

Scrolling the displayed CD text, MP3/WMA text, or MD title.
Press the [SCRL] button for at least 1 second.
Text/Title Scroll
Characters can be entered by using a remote with number buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
8 Repeat steps 5 through 7 and enter the name.
9 Exit name set mode
Press the [MENU] button for at least 1 second.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.
Attaching a title to a CD.
1 Play the disc you want to attach a name to
A title can't be attached to a MD.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Name set mode
Press the [FM] or [AM] button.
Select the "Name Set" display.
4 Enter Name set mode
Press the [
4] or [¢] button for at least 1 second.
5 Move the cursor to the enter character position
Press the [
4] or [¢] button.
6 Select the character type
Press the [
38] button.
Each time the button is pressed the character typed switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7 Select the characters
Press the [FM] or [AM] button.
Disc Naming (DNPS)
CD/MP3/WMA/External disc control features
— 28 —
English
KDC-M9021SE_U.S 03.1.17 3:19 PM Page 28