Menu system – Kenwood KDC-M9021 EN User Manual
Page 29
Setting during operation beep sound etc. functions.
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"Beep" display.
3
Set the menu item
Press the [
4] or [¢] button.
Example: When "Beep" is selected, each time the button is
pressed it switches "Beep ON" or "Beep OFF". Select 1
of them as the setting.
You can continue by returning to step 2 and setting other items.
4
Exit Menu mode
Press the [MENU] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable (
Menu System
Menu system
— 29 —
I N
P / S
AT T
S T
L O U D
R D S
T I
¢
4
FM
AM
SRC
MENU
KDC-PSW9521
KDC-M9021SE/ KDC-M9021/ KDC-8021
Menu display
Menu display
RDS indicator
RDS indicator
Signal Sensor
KDC-M9021SE_U.S 03.1.17 3:19 PM Page 29