Kenwood KDC-M9021 EN - Manual (Page 13)

Switching the information displayed in Standby.
1 Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
4 Enter Display Control mode
Press the [
4] or [¢] button for at least 1 second.
5 Switch the display
Press the [
4] or [¢] button.
Each time the button is pressed the display switches.
Information Display
Demonstration "DEMONSTRATION"
Date & Clock "DATE"/"CLOCK"
Standby display "ALL OFF"
6 Exit Display Control mode
Press the [MENU] button.
Demonstration can be selected when "Display Type A" or "Display
Type C" is selected in (page 32).
Switching the Standby Display
Switching the Full screen display.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
3 Enter Display Control mode
Press the [
4] or [¢] button for at least 1 second.
4 Switch the Full screen display
Press the [
4] or [¢] button.
Each time the button is pressed the display switches.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Graphic 1 (KDC-PSW9521)
Spectrum Analyzer 4 (KDC-M9021SE/ M9021/ 8021)
Graphic 2 (KDC-PSW9521)
Spectrum Analyzer 5 (KDC-M9021SE/ M9021/ 8021)
Switching Full Screen Display
Speaker type Display
OFF "OFF"
For 5 & 4 in. speaker "5/4inch"
For 6 & 6x9 in. speaker "6 * 9/6 inch"
For the OEM speaker "O.E.M."
4 Exit Speaker Setting mode
Press the [Q] button.
— 13 —
5 Exit Display Control mode
Press the [MENU] button.
Full Screen display can be selected when "Display Type C" is
selected in (page 32).
KDC-M9021SE_U.S 03.1.17 3:17 PM Page 13