Kenwood KDC-M9021 EN - Manual (Page 36)

For selecting the display when switched to Auxiliary input
source. For the Disc Naming refer to the (page
28).
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Auxiliary input display setting mode
Press the [FM] or [AM] button.
Select the "Name Set" display.
4 Enter Auxiliary input display setting mode
Press the [
4] or [¢] button for at least 1 second.
The presently selected Auxiliary input display is displayed.
Auxiliary Input Display Setting & Disc Naming
Noise can be reduced when stereo broadcasts are received as
monaural.
Display Setting
"MONO OFF" The monaural reception is OFF.
"MONO ON" The monaural reception is ON.
Monaural Reception
When the TI function is ON and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically.
Display Setting
"ATPS ON" The Auto TP Seek Function is ON.
"ATPS OFF" The Auto TP Seek Function is OFF.
Auto TP Seek
You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region.
Display Setting
"Regional ON" The Region Restrict Function is ON.
"Regional OFF" The Region Restrict Function is OFF.
Sometimes stations in the same network broadcast different
programs or use different program service names.
Restricting RDS Region
(Region Restrict Function)
Menu system
— 36 —
English
KDC-M9021SE_U.S 03.1.17 3:20 PM Page 36