Using default settings to print a picture – Kodak 9.1 User Manual
Page 63
www.kodak.com/go/aiosupport
57
KODAK HERO 9.1 All-in-One Printer
Using default settings to print a picture
Unless you change the default settings, the default for printing pictures is one
4 x 6 in. / 10 x 15 cm picture. (To change the default settings, see
.)
To print a picture from a memory card or USB-connected device using the default
settings:
1. Insert the memory card into the appropriate slot, or connect the digital camera
or portable drive to the front USB port, then touch
View Photos
.
IMPORTANT:
Use only one slot or port at a time.
2. Touch
or
to locate the picture you want to print.
3. Press
to begin printing.
The printer prints a single 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT:
To prevent loss of data from your memory card, do not remove it from the
printer while printing.