Kodak DC25 - Manual (Page 24)

2-14
General Maintenance and Safety
✔ To keep from damaging your DC25, avoid exposing it to moisture and
extreme temperatures.
✔
Clean the outside of the DC25 by wiping it with a clean, dry cloth. Never
use harsh or abrasive cleaners or organic solvents on the camera or any of
its parts.
✔
Never disassemble or touch the inside of the DC25. This could result in
electrical shock.
✔
If you notice smoke or a strange smell coming from the DC25,
immediately turn the camera off, wait a few minutes until the DC25 cools,
and remove the batteries.
Cleaning the Lens
1 Blow gently on the lens to remove dust and dirt.
2 Moisten the lens by breathing lightly on it.
3 Wipe the lens gently with a soft, lint-free cloth or an untreated lens-cleaning
tissue.
☞
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens with chemically treated
eyeglass lens tissue as it may scratch the lens.
Cleaning the Light Sensor
The light sensor is located between the viewfinder and the flash on the camera
front.
Clean the light sensor by gently rubbing it with a soft, dry cloth. Do not use any
organic solvents to clean the sensor.