Kodak DC25 User Manual
Page 19
2-9
2
Using Camera
Memory Full
When the DC25 and/or optional Picture Card are full you must erase the existing
pictures to capture additional pictures. To save pictures, transfer them to your
computer before erasing them.
You may also check the available memory left in the DC25 or Picture Card from
the STATUS display on the LCD. See the
LCD
section in this chapter entitled
Checking Camera Status
for instructions on accessing the STATUS display.
Memory Light
☞
If the optional Picture Card is full, the red Memory light comes on and you
will not be able to take any more pictures. Remove the Picture Card and, if
the camera memory is not full, you can take additional pictures.
Memory Full Display
The red Memory light comes on when the DC25’s and/or
optional Picture Card’s memory is full. You cannot take
additional pictures.
The LCD displays a message similar to the one on
the left if it is turned on when the DC25 and/or
optional Picture Card becomes full.
Power
Busy
Memory
MEMORY FULL