Flash, Automatic power off – Kodak DC25 User Manual
Page 20
2-10
Flash
Your DC25 comes equipped with a built-in sensor flash with three settings. The
flash has an effective range of approximately 2 to13 feet (0.5 to 4 meters).
The DC25 is designed to take pictures indoors under normal lighting conditions
without a flash. Some pictures may need to be lightened using PhotoEnhancer
software. We suggest taking a few test pictures indoors without a flash to test the
possible results. Using the flash may bring out more detail and diminish shadows.
Automatic Power Off
If you do not use your DC25 for approximately 90 seconds, it automatically turns
off. To turn the DC25 on again, press the POWER button.
Off—flash is turned off and will
not fire.
Auto—flash fires automatically
whenever the DC25 determines
that there is not enough light to
take a picture.
Fill—flash fires every time you
press the Shutter button. Use this
setting when the lighting is poor
or when your subject is lit from
behind.
ERASE
POWER
OFF AUTO FILL
STANDARD HIGH
KODAK DC25 DIGITAL CAMERA
Flash switch