Kenwood TH78E - Manual (Page 32)

8 DTMF Memory
You can store 10 DTMF telephone numbers up to a
maximum of 15 digits long in memory.
Storing DTMF Codes
1 Press the M key, then press the MHz key to select
the DTMF code entry mode.
2 Enter the DTMF code on the keypad
3 Press the MR key after entering the DTMF code.
4 Select the channel (O-9) where you want to store
the DTMF code and press the key for that channel.
The DTMF code is stored and the previously
displayed frequency reappears.
5 If you enter the wrong number, press the VFO key to
start over from step 1.
6 To stop during entry, press the BAND key. The
previously displayed frequency appears on the
display.
Recalling Stored DTMF Codes in Receive Mode
1 Press and hold the F key for longer than one
second, then press the MHz key.
2 Press a number key (O-9). The corresponding
stored DTMF code is displayed.
33