Audio filter" setting, Settings, К›е@нле@п – Kenwood DV-4070 User Manual
Page 33: Operation procedure 1
Settings
33
к›Е@нЛЕ@п“
Chapter 2: Various Setups
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
SET UP
1
and
tilt the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press
ENTER
to open the setup screen.
4.
In the setup menu, select "Dynamic Range
Control" by tilting the joystick up or down and
press
ENTER
.
7
Wide
7
Normal
7
Midnight
7
Digital Audio
Dolby Digital
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
5.
Select the level by tilting the joystick up or down,
then press
ENTER
to enter the selection in memory.
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
SET UP
1
and
tilt the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press
ENTER
to open the setup screen.
4.
In the setup menu, select "Audio Filter" by tilting
the joystick up or down and press
ENTER
.
7
Filter 60kHz
7
Filter 110kHz
7
Digital Audio
Dolby Digital
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
5.
Select "Filter 60 kHz" or "Filter 110 kHz" by tilting
the joystick up or down, then press
ENTER
to enter
the selection in memory.
"Audio Filter" Setting
DVD AUDIO is recorded with a maximum sampling
rate of 192 kHz and theoretically capable of
reproducing up to 96 kHz. As a result, the speakers
used may be damaged if they are not compatible with
high frequencies. When an ordinary speaker system is
connected, set the "Audio Filter" setting to "Filter
60 kHz" to protect the speakers. When the speaker in
use are compatible with high frequencies, set this
setting to "Filter 110 kHz". (For details, refer to the
instruction manuals provided with your speakers.)
At the factory, the player has been set to "Filter 60
kHz" to protect the speakers from damage.
Setting items
"
" : Select to return to the previous screen.
"Filter 60 kHz" : Select when the speakers in use
are not suitable for reproduction of high
frequencies.
"Filter 110 kHz" : Select when the speakers in use
are suitable for reproduction of high frequencies.