Kodak 645 - Manual (Page 87)

Capturing and Processing Images
87 Contents Back Next Index
Intervalometer
The Intervalometer is available when the DCS
645M is used with the MAMIYA 645 AFD. It is not
available with the DCS 645C or when the DCS
645M is used with the MAMIYA 645 AF.
The Intervalometer automatically captures a
sequence of images at specified intervals over a
specified time period. You might use the
Intervalometer to capture a flower bud opening or
for unattended surveillance.
The Intervalometer is disabled automatically after
the specified time period, even if the specified
number of images have not been captured. For
example, if you set the Intervalometer for 15
exposures at one second intervals, the buffer fills
after a few exposures, and the camera would not
be able to maintain the one second interval. It
would stop capturing images after 15 seconds
even though 15 images had not been captured.
☛ While the Intervalometer is enabled, the
camera does not enter Battery Save state.
1 Choose Intervalometer from the Main menu.
2 Choose the desired option from the
Intervalometer menu.
3 Change settings, as needed, on the
Intervalometer options screens
(page 88) .
4 Press the left or right side of the Four-way
switch to sequence through the numeric fields.
Press the top or bottom of the Four-way switch
to change the highlighted numeric value.
Press the OK or Cancel button. (In the Enable
screen, choose Yes or No.)