Kodak 645 - Manual (Page 70)

Configuring Your Camera
70 Contents Back Next Index
Setting the Date and Time
A date and time stamp is associated with each
image file.
Inside the DCS 645, a battery maintains the date
and time for up to 14 days. The battery is
recharged when the camera is powered. If this
battery loses its charge, you must reset the date
and time.
☛ You cannot access this battery.
To Set the Date and Time
1 Highlight the Menu icon (page 43) then
choose Main Menu from the drop-down menu
(page 44) .
2 Choose Date/Time from the Main menu.
3 Press the left or right side of the Four-way
switch to sequence through the numeric fields.
4 Press the top or bottom of the Four-way switch
to change the highlighted numeric value.
5 Press the OK or Cancel button.