Kodak 645 - Manual (Page 113)

Caring for Your DCS 645
113 Contents Back Next Index
Cleaning the IR or Anti-aliasing Filter
1 Remove the filter from the DCS 645 (page 40) .
2 Gently blow off the dust using commercially
available canned air (low pressure). If the filter
is still dirty, contact your dealer or service
representative.
3 If the imager is dirty, check the KODAK Web
site (www.kodak.com) for instructions on
cleaning. Choose “Service and Support,” then
under Professional Photography choose
“Cameras, Digital” then “DCS 645.” Follow the
instructions under Cleaning
Recommendations for CCD Coverglass.
Storing
These storage tips apply to the DCS 645. Store
the camera body as described in its User’s
Manual.
If you have an IR or anti-aliasing filter not in use,
store it in the pocket on the included body cap.
Before You Begin