7 operation precautions, Power source, Operating environment – Konica Minolta BIZHUB 164 User Manual
Page 22: Storage of copies, Precaution on transportation
Operation precautions
1
1-16
bizhub 164
1.7
1.7
Operation precautions
To ensure the optimum performance of this machine, observe the precautions described below.
Power source
The power source requirements are as follows.
-
Use a power source with as little voltage or frequency fluctuations as possible.
–
Voltage fluctuation: Maximum ±10% (at 110 V/120 to 127 V/220 to 240 V AC)
–
Frequency fluctuation: Maximum ±3 Hz (at 50 Hz/60 Hz)
Operating environment
The environmental requirements for correct operation of the machine are as follows.
-
Temperature: 10°C (50°F) to 30°C (86°F) with fluctuations of no more than 10°C (50°F) within an hour
-
Humidity: 15% to 85% with fluctuations of no more than 10% within an hour
Storage of copies
To store copies, follow the recommendation listed below.
-
Copies that are to be kept for a long time should be kept where they are not exposed to light in order
to prevent them from fading.
-
Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies.
Precaution on transportation
Assign two or more persons who should position their hands at the portions shown when moving the ma-
chine.