Kodak G600 User Manual
Page 57
Troubleshooting
www.kodak.com/go/support
51
Camera battery button/light
Light status
Cause
Action/solution
Light is off
Camera not properly seated on
connector.
Reseat the camera on the printer
dock (
).
Unrecognized battery type
installed, or camera does not
support charging.
Install a Kodak Ni-MH
rechargeable digital camera
battery or Kodak Li-Ion
rechargeable digital camera
battery. See your camera user’s
guide for battery compatibility and
other charging options.
AC power cord not connected.
Connect the AC power cord
(
).
Light glows green
Camera just placed on printer
dock.
None; dock is checking the charge
status of the battery.
Battery fully charged.
None required.
Light blinks green
Battery charging.
Leave the camera on the dock to
continue charging or to maintain
charge.
Light glows amber
Battery not properly installed.
Re-install the battery.
Battery or connector pin damaged. Check for damage.
Camera and battery exposed to
extreme temperatures.
Slowly return the camera and
battery to room temperature.
Battery exhausted.
Refresh the battery (
).
Light blinks amber
The Ni-MH battery pack refresh
cycle in progress: discharging
(light turns off as discharging
progresses).
Leave the camera on the dock to
continue refresh cycle (
).