Troubleshooting, Printing problems, 9 troubleshooting – Kodak G600 User Manual
Page 47
www.kodak.com/go/support
41
9
Troubleshooting
For step-by-step product support, visit
nd select
Interactive Troubleshooting and Repairs. Select FAQs to learn how to perform a
Diagnostic test (identifies common problems).
Printing problems
If...
Try the following
Paper does not
feed
(Paper light may
glow red)
IMPORTANT: Use only Kodak color cartridge & paper kits (with
symbol) for your printer dock. Do not use inkjet paper.
■
The paper-tray may be empty. Load paper (
), re-install the tray,
then press .
■
Check the paper:
1
Remove the paper-tray (
).
2
Inspect the paper supply. Make sure the paper is not damaged.
Replace with new paper, if necessary.
3
Carefully "fan" the paper to keep the sheets from sticking together.
4
Reload the tray. Do not load more than 30 sheets of paper
(see
upper limit line, , inside tray)
.
5
Re-install the tray, then press to resume printing.
■
Clean the paper-feed rollers (
).
Multiple sheets
of paper are
pulled through
printer
1
Remove the paper-tray (
).
2
Remove the paper supply from the tray. Carefully "fan" the paper to
keep the sheets from sticking together.
3
Reload the tray. Do not load more than 30 sheets of paper
(see
upper limit line,
, inside tray)
.
4
Re-install the tray, then press to resume printing.