Kodak G600 User Manual

Page 15

Setting up your digital camera

www.kodak.com/go/support

Refreshing the Kodak Ni-MH rechargeable camera battery

IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH

rechargeable digital camera battery KAA2HR only. Li-Ion batteries do not
require refreshing.

NOTE: If you are getting fewer than 20 pictures per charge, you may need to refresh the battery. The

refresh cycle completely discharges the battery, then fully charges it. See Extending battery life,

1 Make sure the Ni-MH rechargeable battery is in the camera.

2 Place your EasyShare camera on the printer dock (

3 Press and hold the Print Layout button,

, and the Red-eye Reduction button,

on the printer dock at the same time until the Battery status light blinks

amber (approximately 5 seconds), then release the buttons.

To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital
camera, visit

. See your camera user’s guide for

battery compatibility.

8 hours for
full refresh

Battery light glows
green when charging
is complete.

Battery status light