Kenwood TK-3173 User Manual
Page 35
26
S
CAN
R
EVERT
The Revert zone and channel/ group ID is the zone and
channel/ group ID which the transceiver automatically selects
when pressing the PTT switch during Scan, to transmit. Your
dealer can program 1 of 6 types of Scan Reverts for your
transceiver:
•
Last Called: The last zone and channel/ group ID received is
assigned as the new revert zone and channel/ group ID.
•
Last Used: The last zone and channel/ group ID responded to is
assigned as the new revert zone and channel/ group ID.
•
Selected: The last zone and channel/ group ID selected is
assigned as the new revert zone and channel/ group ID.
•
Selected + Talkback: If the zone and channel/ group ID has
been changed during Scan, the newly selected zone and
channel/ group ID is assigned as the new revert zone and
channel/ group ID. The transceiver “talks back” on the current
receive channel/ group ID.
•
Priority: If your dealer has programmed the Priority channel, this
channel is the revert zone and channel.
•
Priority + Talkback: If your dealer has programmed the Priority
channel, this channel is the revert zone and channel. The
transceiver “talks back” on the current receive channel.
Note: “Priority” and “Priority + Talkback” are not available for
Trunking Systems.