Tk-3173 o – Kenwood TK-3173 User Manual
Page 34
25
A
DD
TO
S
CAN
/ D
ELETE
FROM
S
CAN
Press the key programmed as Scan Delete/Add, to add or
remove each channel/ group ID to or from the scan sequence.
•
The channel/ group ID add indicator (
) will appear on
the display when the selected channel/ group ID is added to the
scan sequence.
Press and hold the key programmed as Scan Delete/Add, to
add or remove each zone to or from the scan sequence.
•
The zone add indicator (
) will appear on the display
when the selected zone is added to the scan sequence.
P
RIORITY
S
CAN
The Priority channel must be programmed in order for Priority
Scan to function.
The transceiver will automatically change to the Priority
channel when a signal is received on it, even if a signal is
being received on a normal channel.
•
The
indicator appears on the display when the selected
channel is the Priority channel.
Note: Priority cannot be programmed onto the group ID of a
Trunking zone; it can be used only on channels of Conventional
zones.
G
ROUP
S
CAN
(TK-3173 O
NLY
)
Group Scan is useful when more than one group ID is
programmed in a zone. Group Scan is set by your dealer on
request. It scans the revert groups as well as groups that are
allowed to be scanned.
When a call is received, the group indicator shows the group
ID, and that group becomes the revert group. Simply press
the PTT switch to respond to the call.