Kenwood TK-3173 - Manual (Page 28)

19
P
LACING A
T
ELEPHONE
C
ALL
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the and C> keys or rotate the selector to select
your desired Autodial list number.
• The stored entry appears on the display. Press and hold the
Side 1 key to toggle the display between the list number and
the entry name.
3 Press the PTT switch to make the call or the Side 2 key to
transmit the DTMF number.
4 When the called party responds, press the PTT switch and
speak into the microphone. Release the PTT switch to
receive.
• Only one person can speak at a time.
5 To end the call, press and hold the PTT switch, then press
the key programmed as Telephone Disconnect.
R
ECEIVING A
T
ELEPHONE
C
ALL
1 When a telephone call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
• A ringer tone will sound when a call is received.
2 Press and hold the PTT switch to speak, and release it to
receive.
• Only one person can speak at a time.
3 To end the call, press and hold the PTT switch, then press
the key programmed as Telephone Disconnect.