Kenwood DDX7034BT User Manual
Page 78
78 DNX7140/DNX7000EX/DDX714/DDX7034BT
Setup Menu
Set a delay time
3
Make fine adjustment of the delay time of the
speaker output specified at
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
1.6feet
2.5feet
5feet
+2.5feet
+0feet
+3.4feet
DVD Setup
You can set up the DVD play.
Display the DVD Setup screen
1
Touch [
]
>
[
]
>
[DVD SETUP]. (page 63)
Set each item
2
[Menu Language] Selects a disc menu
language.*
1
(See
[Subtitle Language] Selects a subtitle
language.*
1
(See
[Audio Language] Selects an audio
language.*
1
(See
[Dynamic Range Control] Sets the dynamic
range.*
1
(
"Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
(
"ON")