Kenwood DDX7034BT - Manual (Page 70)

70 DNX7140/DNX7000EX/DDX714/DDX7034BT
Setup Menu
Panel Color Coordinate
Sets the screen and button illumination color.
Display the Color screen 1
Touch [ ] > [ ] > [Display] > [Color].
(page 63)
Display the Panel Color Coordinate screen 2
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the screen and buttons
changes one after another.
⁄
When touching [SET], make sure [Panel Color Scan] •
is set to "OFF".
Select a color 3
1 1 1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
To register your original color
Start the RGB coordinate 1
Adjust each color value 2
1 1 1
1 Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
Select a Preset number to register 3
2 sec.
Adjusted color is registered to the selected
Preset button.
Complete the color coordination 4