Kenwood DDX7034BT - Manual (Page 59)

English 59
Audio Control
Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
Display the Source Select Screen 1
SRC
Display the Audio Control menu 2
In this manual, the above selection is indicated
as:
Touch [
] > [ ].
Select the Audio Control item 3
Item Page
[Audio Control] 59
[Equalizer] 60
[EQ] 60
[Zone Control] 61
[Space Enhancer] 61
[Position] 62
Audio Control
You can adjust the front/rear and right/left audio
balance.
Display the Audio Control screen 1
Touch [ ] > [ ] > [Audio Control]. (page 59)
Set each item 2
1 1 1
1 Adjust the front/back and left/right balance
of the volume by touching the Adjust screen.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
⁄
If you have increased the volume first, then reduced •
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Bass Boost] Sets the amount of bass boost.
"OFF"/ "Step1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.