Kenwood DDX7034BT - Manual (Page 44)

44 DNX7140/DNX7000EX/DDX714/DDX7034BT
HD Radio Control (North American sales area only)
Direct Search
Tuning in by entering the desired frequency or
channel number.
KTC-HR300 (optional accessory) connected only.
Display the Source 1 Control Screen
See (page 42).
Start Direct Search 2
Enter the frequency or channel number 3
1 1 1
1 Enters the frequency or channel number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
Tune in the frequency or channel 4
Receive mode
Sets the radio broadcasts receive mode.
Display the Source 1 Control Screen
See (page 42).
Display the Receive mode screen 2
Select the receive mode 3
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.