Important safety instructions – Kodak EASYSHARE W1020 User Manual
Page 69
Appendix
www.kodak.com/go/support
63
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel. Do not
expose this product to liquid, moisture, or extreme temperatures.
The use of controls, adjustments, or procedures other than those
specified herein may result in exposure to shock and/or electrical
or mechanical hazards. If the LCD breaks, do not touch the glass
or liquid. Contact Kodak customer support.
CAUTION:
When using this product, it should be installed and operated with
a minimum distance of 7.9 in. (20 cm) for 2.4 GHz operations
between the radiator and your body. This transmitter must not be
collocated or operate in conjunction with any other antenna or
transmitter.
■
The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit
.
■
Use only a Leader Electronics Inc. AC adapter, model MU18-2120150-A1, 12-volt,
1.5 amp.
In Europe, use only a Phihong AC adapter, model PSA 18R-120P.
Use of other AC adapters may damage the frame and void your warranties.
■
Use only a USB-certified computer equipped with a current-limiting motherboard.
Contact your computer manufacturer if you have questions.
■
When displayed with the stand extended, the frame rests at a 68 - 90 degree
angle.
■
Do not place frame near naked flame sources such as lighted candles or heaters.
■
Excessive sound pressure from earphones and headphones may cause hearing
loss.