Kodak EASYSHARE W1020 - Manual (Page 19)

Setting up for wireless operation
www.kodak.com/go/support 13
MAC OS users
Instead of installing the software on your MACINTOSH computer, open the
Configuration window right from your browser and start setting up access to Web
content and customizing your frame from your computer (see
page 11 ).
1 Make sure the frame is connected to your wireless network ( page 5 ) and your
computer is connected to the Internet.
2 On the frame, tap Home
→
Settings
→
Network, then tap Select.
3 Retrieve the IP address (format: XXX.XXX.X.XXX) from the frame’s Network
Settings screen.
4 Open a browser (for example, INTERNET EXPLORER, MOZILLA FIREFOX, SAFARI,
etc.) on your computer.
5 Enter the IP address in the browser’s address window, then press Enter.
The KODAK Displays and Devices Configuration window opens in your browser.
6 Go to step 5 on page 12 to start configuring your frame.
Enter the IP address here