Kodak EASYSHARE W1020 User Manual
Page 54
48
www.kodak.com/go/support
Changing settings and more
KODAK Gallery
Specify your country, email address, and password.
First, install the software (
) and set up access to the
Kodak Gallery (
Network
Set up your frame for wireless operation. See
Device configuration
Frame name—use the on-screen keyboard to assign a name
to your frame. This name is referenced when connecting to
your wireless network.. If you have more than one frame on
your wireless network, give them unique names so you can tell
them apart.
RSS feeds—simple sites you set up to view on your frame
using the digital display software. Edit RSS feeds from your
computer using the software. See
Frame connections—choose how your frame works with
other devices. Share frame content: choose to turn off or
allow devices (such as computers or other wireless frames) to
access your frame contents; Remote setup: specify whether
or not to allow your frame to be set up from your computer;
Remote copy: turn off or allow copying to your frame from
your computer; Remote copy destination: specify a default
destination on your frame (internal memory, SD card, etc.) to
save your copied pictures.
USB connection mode—Before you connect a USB
computer or printer, choose Connect to computer (default)
or Connect to printer. See
Language
Choose your language (
Automatic resizing
Choose to turn on or off automatic resizing of your pictures
when copying. Full resolution is unnecessary for viewing and
quickly fills up the frame’s memory. Choose full resolution for
printing.
About
Check your frame model, serial number, and firmware version.
Setting
Options