Kodak EASYSHARE W1020 User Manual
Page 13
Setting up for wireless operation
www.kodak.com/go/support
7
2 With your home network highlighted, tap OK to connect to your home network.
The Connecting (or the wireless network security screen, if enabled) appears.
Or, tap Exit to go to the Home screen without connecting. (See
Enter security key (if you have wireless network security enabled)
You are prompted to enter your security key (WEP or WPA) using the on-screen
keyboard. Slide along the bottom of the touch border (or tap below the slider
arrows) to highlight a character then tap
(Select) to enter it in the text box.
Tap Done when finished.
If you do not have security enabled, go to step
. (We recommend that you
enable your network security to prevent others from accessing your wireless home
network.)
NOTE: The screen identifies your security as either WEP or WPA
A WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive)
Done
Select
Text box
Slider
Slider arrows
Backspace - erases text
On the bottom border, keep
sliding (or tapping slider
arrows) left/right to go to the
previous or next row.
Touch tips
Right border - tap only