Upgrading your firmware – Kodak EASYSHARE W1020 User Manual
Page 56
50
www.kodak.com/go/support
Changing settings and more
5 Tap Enable, then Save when you’re done.
Your frame will now automatically turn on and off at the times you specified.
NOTE: Make sure the power button on the frame is On. See
If your frame loses power, the clock time returns to the factory setting and the
automatic on/off times, if set, are disabled. To reset the clock and re-enable your
on/off times, see
Resetting the clock after losing power, page 58
.
Upgrading your firmware
Firmware is the software that runs on your frame. To check for the latest version, visit
.
Manually upgrade firmware
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go to
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to the root directory of a memory card or USB flash drive, then
insert into the frame. See
for copying files.
4 Tap
(Home), then
(Settings).
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power button on the frame to Off, then back to On.