KTM Super Duke 990s - Manual (Page 36)

ENGLISH
35
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
2
3
4
1
Replacing the brake light and taillight bulbs
Remove the seat.
BULB FOR BRAKE LIGHT:
Turn the bulb socket [1] approx. 30° in a counterclockwise direction and pull
it out of the taillight housing. Slightly press in the bulb, turn approx. 30° in
a counterclockwise direction and remove it from the socket.
Proceed in the reverse order to mount a new bulb.
BULBS FOR THE TAILLIGHT:
Remove the bulb socket [2] from the housing and pull the bulb out of the
socket. Insert a new bulb and press the bulb socket all the way into the tail-
light housing.
Mount the seat.
Replacing the flasher bulbs
Remove the screw on the back of the turn signal, carefully fold the lens [3]
towards the motorcycle and remove. Turn the cap [4] approx. 15° in a coun-
terclockwise direction and remove.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.