Konica Minolta APS Camera - Manual (Page 34)

65 64
ADDITIONAL
FEATURES
PRINT-QUANTITY SELECT
Print-quantity select lets you choose the number of prints you
will receive from the lab before taking the picture.
Setting the Print Quantity
Before taking the picture-
1. Open the control- panel
door and press the print
button to enter the
desired number of prints.
•The quantity will be displayed
on the data panel.
•Press the print button to
increase the quantity by one.
•The quantity can be set to a
maximum of nine. After 9, the
quantity restarts at 1.
•Press the shutter-release
button partway down to return
to the normal data panel
display;
will remain in
the data panel.
•After taking the picture, the print quantity can only be changed
to 0.
•The default quantity for color slide film is 0.
•Some labs may not be able to read the print quantity data.
See your photofinisher for details.
2. Take the picture.
•The quantity is reset to one for
the next frame.